Compression Springs
Custom compression geometries for actuation, control and mechanical assemblies.
Aerospace
ProvenPrecisionFor selected aerospace systems & assemblies.
Coils, springs, formed wire and welded subassemblies produced under controlled processes, with material traceability and documentation for components where reliability matters.
Proven capability
- AS9100D certified
- Material traceability
- Precision coiling
- Laser-welded subassemblies
- Prototype to production
01Aerospace component partner
Controlled process. Documented result.
Precision coilingWire formingLaser weldingValue add
Aerospace assemblies depend on components behaving identically every time they are made. SCS brings coiling, wire forming and value-added processes together under controlled manufacture, with the material traceability and documentation an aerospace supply chain expects.
SCS supports selected aerospace requirements at component and subassembly level. Final assembly qualification and airworthiness responsibility remain customer-defined.
02Aerospace components
Built to a drawing, not a catalogue
SCS produces customer-defined coil, spring, wire form and subassembly geometries for selected aerospace systems and assemblies.
Extension & Torsion Springs
Hook-ended and leg-formed springs for return, tension and rotational functions.
Precision Coils
Round and flat wire coils wound to customer-defined pitch and geometry.
Formed Wire Components
2D and 3D wire forms: clips, links, brackets and customer-defined geometries.
Welded Subassemblies
Laser-welded wire and coil assemblies bringing several elements into one controlled part.
05Materials & complementary processes
Material is a decision, not a default
Material choice depends on the intended function, process route and customer specification, presented as a capability set rather than a claim that every material suits every component. Behind that sit long-term relationships with the world's leading certified medical, industrial and aerospace material suppliers, a dual-source strategy on critical raw materials so a long-life programme never depends on a single mill, and strategic safety stock on key alloys and high-running materials.
Materials
- Stainless steel 304 / 302 / 316
- 17-7 stainless
- Phynox® / Elgiloy®
- MP35N
- Titanium
- Tungsten
- Inconel®
- Alloy C276
- Palladium & precious alloys
Complementary operations
- Wire cutting & straightening
- Laser welding
- Assembly
- Ultrasonic cleaning
- Passivation
- PTFE coating
- Parylene coating
- Gold coating
- Heat treatment
- Laser marking
- Testing & inspection support
06Application knowledge
Where these components go to work
SCS supports selected aerospace component requirements across a range of system areas. Final system architecture, qualification and airworthiness responsibility remain customer-defined.
07How SCS delivers
Four processes. One technical conversation.
Coil
Round and flat wire coils, custom spring forms and coil-based subassemblies.
View Coil
Grind
Straight, tapered, stepped and multi-diameter pins, shafts and mandrels.
View Grind
Wire Forming
2D and 3D wire forms, clips, links, rings and customer-defined geometries.
View Wire Forming
Value Add
Cutting, straightening, joining, assembly, cleaning, finishing, marking and inspection support where approved.
View Value Add
08From drawing to supply
From first drawing to dependable supply
01
01
Technical review
Start with a drawing, sample, target geometry or early-stage component requirement.
02
02
Design-for-manufacture support
Review material, geometry, process route and practical production considerations with SCS engineering.
03
03
Prototype
Create initial parts for technical assessment and development work.
04
04
Pilot manufacture
Establish the agreed route, inspection approach and repeatability before wider production.
05
05
Ongoing supply
Support low, medium or higher-volume requirements through controlled manufacturing and responsive planning.
09Case studies
The problems that we solve
Twelve formed wire solutions for a cabin retrofit
A global aerospace supply chain company needed a custom wire and component partner for a European flag carrier's seating and cabin interior redesign.
Discuss a similar part
A safety component for overhead oxygen panels
An aviation services specialist had the engineering design for a component that stops oxygen mask panels falling during use, but no way to manufacture it.
Discuss a similar part
Custom wire form solutions in production since 1982
A household smoke alarm manufacturer wanted faster detection response and better production efficiency, and needed a wire component in the trigger mechanism redesigned.
Discuss a similar part10Aerospace quality
Quality and traceability built around controlled manufacturing
Quality management, inspection and documentation built to give aerospace teams confidence, without making qualification claims on their behalf. Final system qualification and airworthiness responsibility remain customer-defined.
ISO 13485ISO 9001AS9100D
AS9100D certified (NQA)
ISO 9001 quality management
Dedicated quality team
Visual & dimensional inspection
100% inspection where specified
Certificates of conformance
Material & process traceability
12Start a technical review
Talk to an aerospace component engineer
Send a drawing, CAD file, BOM or specification. We review the likely process route and respond with the next practical step. No obligation.
- Drawing, CAD, BOM or specification review
- Design-for-manufacture guidance
- Prototype through ongoing supply
- A clear next step on feasibility
ISO 13485ISO 9001AS9100D